First check whether the device does not respond at all, turns on but shows no image, does not start Windows or displays an error message.
Safety
Do you smell burning, see smoke or sparks, is there liquid damage or is the battery swollen? Then stop using the device. Only disconnect the power if it is safe to do so and contact us immediately.
The device does not respond
Laptop: connect the supplied or demonstrably suitable charger directly, try a different power socket, check the charging lights, let the laptop charge for 30 minutes and disconnect USB devices and any docking station. If the laptop does not respond, disconnect the charger, hold down the power button for 15 to 20 seconds and reconnect only the charger.
Desktop: check the power cable, power socket and extension lead. Set any power supply switch on the back to “I” and disconnect non-essential USB devices.
Never use a random charger with the wrong voltage, connector or insufficient power.
The device turns on but shows no image
Disconnect docking stations and external devices. On a laptop, check the brightness and the display key, and test an external monitor if possible. On a desktop, check that the monitor is receiving power, that the correct input is selected and that the video cable is properly connected to the correct video output. A message such as “No signal” or “Power Saving Mode” usually means that the monitor is not receiving a video signal.
Does the fan immediately run at full speed, does the screen stay black or do you hear beeps? Switch off, make a note of the lights and sounds and contact us.
Windows does not start or shows an error message
Take a photo of messages such as “Boot Device”, “Non-System Disk” or “Invalid Partition Table”. Disconnect USB sticks and external drives and perform one normal restart. Do not reinstall Windows and do not change BIOS or disk settings before contacting us; data may be lost.
When contacting us, state your order number, model, lights, sounds, cables and error message, and send a photo or video if possible. Do not open the device and do not have any work carried out by a third party without ReMarkt's prior consent.
